How to use › Solo play

Solo play

Overview

Disclaimer: the entire UI of this app, including this help, is machine-translated. Please forgive any unnatural or incorrect wording.

Solo play turns a list you built in Card lists into a deck so you can play it on your own and see how it runs.

It is a visual aid for what you could do with pen and paper; game rules are never resolved automatically.

  1. 1Find cards in Card search and build a card list in Card lists (the top 20 cards are used as the deck)
  2. 2Press Solo play in the header to go there
  3. 3Choose the list to use as your deck and as the opponent's deck
  4. 4Click cards to place them and keep track of the game in the log
  • Placement is saved per list and per side, so switching decks keeps the previous state.
  • The screen has three areas: controls, list and playmat (their order can be rearranged on desktop).
  • A disclaimer panel appears the first time you open Solo play; read it to the end to enable the button.

List & placement

The list area shows the chosen deck in registration order, in a 5-by-4 grid. Battle lists use only the actual cards in Main; Side does not fill empty slots. Free lists use at most the first 20 cards. Positions stay fixed after placement.

  1. 1Click a card in the list or on the playmat
  2. 2Pick a destination from the placement buttons under the card details
  3. 3Move it to the deck, hand, discard pile, active spot, bench 1-3 or stadium
  • The number on each card in the list is its deck ID (1-20 in registration order) and never changes, wherever the card is placed.
  • The label at the bottom of a card shows where it is now.
  • The hand holds up to 10 cards; the Hand button is disabled when it is full.
  • Only Pokémon, fossils and Pokémon tools can go to the active spot or bench 1-3, and only stadium cards can go to the stadium slot.
  • Reset beside the list selector returns only the side you are viewing to the deck; the log is kept.
  • To reset everything, press Reset all in the control area.

Playmat

The playmat holds the active spot, bench 1-3, the stadium slot and the points. The top half is the opponent, the bottom half is you.

  • The upper right of an active or bench slot is the damage counter (steps of 10, up to 990); the lower right of the upper half is the energy counter. Both are changed in the modal you get by clicking the card from the playmat side.
  • HP and energy can be edited even on an empty bench slot.
  • For stacked Pokémon and tools, use the up and down arrows shown beside the card details to switch to the other cards.
  • The swap button (double arrow) exchanges the contents of the active spot and a bench slot, including HP and energy.
  • The trash button opens the discard panel, grouped by card type with counts, where cards can also be sent back.
  • Click the circles beside the discard pile to record 0-3 points.

Damage, energy and turn handling are never calculated for you; everything is manual.

Log, memory & notes

Every move is written to the log so you can retrace the game later. The log area has Log, Memory and Notes tabs.

  • The log is split by turn. Press "Turn +" to start at "Turn 1, first", after which first and second alternate.
  • Click a line to highlight it and use the minus button on the right to delete just that line. Deleting a turn heading removes that whole turn and shifts the rest up.
  • Settings lets you choose which actions are logged (placement, swap, dice roll, HP, energy, reset). Only placement and swap are on at first.
  • Settings also offers copy and download of the log text, which you can edit in place.
  • Memory stores up to 20 snapshots of the board (placement, HP, energy, points) and the log position; Recall returns you to that point.
  • Notes is free text and survives Reset all.

Pick, dice & draw odds

These tools let you handle randomness manually.

  • Pick: press it to enter pick mode, where clicking a card marks it with a green frame and a number in the order you picked. Click again to unmark, or use Clear pick to remove all marks. Press End pick to go back to normal actions such as placement.
  • Dice: press the dice button to open a panel for the range (0-20) and how many numbers to draw (1-10). Press Roll and the result appears above the dice button.
  • Dice presets (pick, your or the opponent's deck, hand, Pokémon, basics, and so on) draw from that group's count or deck IDs. Presets with no cards cannot be chosen.

Example: compare two opening sequences

Choose the same 20-card list, arrange the opening hand and field, and save the position with Memory. Play the first sequence manually and record it in the log or memo. Recall the saved position to try a different sequence under the same conditions. Drawing, damage, evolution and rule resolution remain manual; this is not an automatic opponent.

Related guides